Section 1 of 1 in this document

Application for Approved Materials List

PLEASE READ THE FOLLOWING CAREFULLY BEFORE SUBMITTING AN APPLICATION:

This application is provided to allow for the District's consideration of products to be added to or updated on the District's Approved Materials List (AML).

SUBMIT ONE APPLICATION PER PRODUCT. APPLICATIONS CONTAINING MULTIPLE PRODUCTS WILL NOT BE REVIEWED.

SUBMIT ALL REQUIRED FIELDS. INCOMPLETE APPLICATIONS WILL NOT BE REVIEWED.

Submission of an application is not an offer or guarantee of the incorporation of the submitted product into the District's AML.

Determination of products to be added to or updated on the District's AML shall be at the sole discretion of the District. All determinations are final.

The District will endeavor to review all applications in a timely manner but makes no guarantee regarding the duration or outcome of the review.

The District plans to publish a new version of the AML at the beginning of each year, if determined necessary by the District. However, the District may make changes to the document at any time, if determined necessary by the District.

Contractors may submit the products of any manufacturer at any time for "or-equal" consideration on specific District projects (and those projects containing facilities that will be dedicated to the District), in conformance with Specification Section 01630 - Product Substitution Procedures.

Application Type

Please select one:

New (product not on current AML)

Update (product already on current AML)

Contact Information

Company Name

Phone Number

Fax Number

Title

Website

Specification Section

Product (list will populate based on selection above)

Concrete (select one):

Form Ties

Admixtures

Mechanical Couplers

Precast Reinforced Concrete Manholes (select one):

Precast Reinforced Concrete Products

Cast Iron Frame and Covers

Composite Manhole Frames and Covers

Concrete Adhesive

Precast Concrete Vaults (select one):

Precast Vaults and Meter Boxes

Ladders

Joint Sealing Compound

Waterproofing

Grease Interceptors (select one):

Grease Interceptors

Epoxy Coating for Sewer Manhole Rehabilitation (select one):

Coating

Repair materials

Painting and Coating (select one):

Epoxy

Epoxy (for immersion in potable or recycled water)

Urethane

High-Solids Epoxy

Sulfide-Resistant Epoxy

Bituminous Mastic

Dissimilar Metal Connections (select one):

Insulating Flange Kits

Insulating Bushings

Casing Spacers

Casing End Seals

Wax Tape Coating System

Corrosion Protection (select one):

Weld Cap Primer

Weld Caps

Hot Tap Connections (select one):

Tapping sleeves for taps smaller than the pipeline

Tapping sleeves for size on size taps

Tapping sleeves onto 14-inch and larger ACP

Ductile-Iron Pipe and Fittings (select one):

Pipe

Push-On Joint Restraint Harness for Ductile Iron Pipe

Fittings

Mechanical Joint Restraining System for Ductile Iron Pipe

Mechanical Joint Restraining System for PVC Pipe

Plastic Film Wrap

Ceramic Epoxy Lining

Corrosion Guard

Copper, Brass, and Bronze Pipe Fittings and Appurtenances (select one):

Copper Tubing and Fittings

Customer Service Valve

Corporation Stop

Angle Meter Stop

Service Saddle (for Ductile-Iron main)

Service Saddles (for PVC main)

Insulating Pipe

PVC Pressure Distribution Pipe (select one):

PVC Distribution Pipe

Push-On Joint Restraint Harness for PVC Pipe

Gravity Sewer Pipelines (select one):

PVC Pipe

PVC Fittings

Vitrified-Clay Pipe and Fittings

Sewer Laterals (select one):

Banded Flexible Saddle Wyes

Banded Flexible Coupling

Air Valves (select one):

Combination Valves

Air Valve Enclosure

Manual Valves (select one):

Metal Seated Gate Valves

Butterfly Valves

Resilient Seated Gate Valves

Valve Boxes

Fire Hydrant (select one):

Wet Barrel Fire Hydrant

Meters (select one):

Customer Meters and Fire Service Bypass Meters (3/4-inch through 1-inch)

Customer Meter (1-1/2 inch through 2 inch)

Commercial Customer Meters (3-inch through 8-inch)

Irrigation Customer Meters (3-inch through 8-inch) and Commercial Bypass Meters (2-inch)

Propeller Flowmeters

Magnetic Flowmeters

Potable Water, Recycled Water, and Wastewater Facilities Identification (select one):

Warning Tape and Pipe Sleeves

Witness Markers

Pipe Couplings and Adapters (select one):

Sleeve-Type Couplings

Restrained Sleeve-Type Couplings

Restrained One-Piece Coupling

Wall and Slab Penetrations (select one):

Wall Pipe Modular Seals

Automatic Control Valves (select one):

Check Valves

Solenoid Control Valves

Pressure Reducing Valves

Pressure Relief Valves

Surge Anticipator Valves

Pump Controller Valves

Altitude Valves

Pipe Supports (select one):

Pipe Supports

Electrical Components (select one):

Motors

Automatic Transfer Switches

Electric Actuators

Instrumentation (select one):

Pressure Transmitters

Level Transmitter

Gas Detectors

Pump Control Panels

Product Information

Please find the latest version of the District's Standard Specifications at this link:

https://www.mnwd.com/standards-specifications/

Upload a copy of the pertinent section(s) from the District's latest version of the Standard Specifications and/or Standard Drawing(s) (see link above).

Click Here to Upload

Upload Manufacturer's product information (cut-sheet, catalog data, specifications, shop drawings, dimension drawings, etc.).

Click Here to Upload

Upload Manufacturer's project experience and reference contact information for the product.

Click Here to Upload

Applicant's Certification (select one)

I/We have reviewed in detail and certify that the material and/or equipment contained in this application meets all the requirements specified in or shown on the District’s Standard Specifications and Standard Drawings WITH NO EXCEPTIONS.

I/We have reviewed in detail and certify that the material and/or equipment contained in this application CONTAINS DEVIATIONS from the requirements specified in or shown on the District’s Standard Specifications and Standard Drawings.

Deviations (list all that apply, including reference to paragraph of applicable Specification Section and/or Standard Drawing)

For questions regarding this form or applications, contact:

Sheldon Yu
(949) 425-3515
SYu@MNWD.com

Recaptcha Response

Be sure to verify that you are not a robot by using the Captcha tool at the below.

Having reCaptcha issues? Click here to reset the widget.

Application for Approved Materials List

Application Type

Please select one:

Contact Information

Address

Contact Name

Specification Section

Please select one:

Product (list will populate based on selection above)

Concrete (select one):

Precast Reinforced Concrete Manholes (select one):

Precast Concrete Vaults (select one):

Grease Interceptors (select one):

Epoxy Coating for Sewer Manhole Rehabilitation (select one):

Painting and Coating (select one):

Dissimilar Metal Connections (select one):

Corrosion Protection (select one):

Hot Tap Connections (select one):

Ductile-Iron Pipe and Fittings (select one):

Copper, Brass, and Bronze Pipe Fittings and Appurtenances (select one):

PVC Pressure Distribution Pipe (select one):

Gravity Sewer Pipelines (select one):

Sewer Laterals (select one):

Air Valves (select one):

Manual Valves (select one):

Fire Hydrant (select one):

Meters (select one):

Potable Water, Recycled Water, and Wastewater Facilities Identification (select one):

Pipe Couplings and Adapters (select one):

Wall and Slab Penetrations (select one):

Automatic Control Valves (select one):

Pipe Supports (select one):

Electrical Components (select one):

Instrumentation (select one):

Product Information

Upload a copy of the pertinent section(s) from the District's latest version of the Standard Specifications and/or Standard Drawing(s) (see link above).

Upload Manufacturer's product information (cut-sheet, catalog data, specifications, shop drawings, dimension drawings, etc.).

Upload Manufacturer's project experience and reference contact information for the product.

Applicant's Certification (select one)